马铃薯枯萎病和干腐病药剂防治筛选试验报告

马铃薯产业是宁夏“1+4”特色优势产业,是西吉县所有农作物中种植面积最大、涉及农户最多、比较效益最高的农民脱贫致富的主导产业。近年来西吉县马铃薯产业由商品薯种植大县向种薯繁育大县的转变,推动了农业增效,农民增收的快速发展。但各类土传性病害的发生影响了马铃薯产业的发展,同时磋商了农民种植的积极性。为了测定筛选出对马铃薯枯萎病和干腐病防治效果好、成本较低药剂,为大田防治提供科学依据。     

Changes in photosynthesis,growth, and sugar content of commercial sugarcane cultivars and Erianthus under flood conditions

Sugarcane (Saccharum spp.) is an economical crop in the tropical and subtropical countries. However, because of global climate change, flooding has become problematic, particularly during the rainy season, in Thailand. We investigated the effects of floods on three commercial sugarcane cultivars, namely NiF8, U-thong 6 (UT6), and U-thong 9 (UT9), as well as Erianthus spp. Growth was assessed using a pot experiment in a glasshouse with two treatments: (1) control and (2) 60 d of flooding followed by 30 d of normal conditions. In comparison with control, during prolonged flooding, Erianthus showed greatly decreased CO₂ assimilation, whereas NiF8, UT6, and UT9 showed slightly declined CO₂ assimilation. Growth in plants subjected to 60 d of flooding was less influenced by floods while sucrose content was not affected except in UT6. During flooding, some roots died, resulting in plants compensating adventitious roots to offset the negative effects of root death and to assist them in maintaining their growth, which appeared from the submerged nodes, with different characteristics for each cultivar. However, 30 d after draining, roots remained damaged, while adventitious roots died, resulting in lesser growth as compared with the control, but it did not significantly affect sucrose content and sugar yield. This study suggests that sugarcane plants need to produce the adventitious roots to compensate their roots’ death during flooding and require time to recover their root system after flooding for obtaining the optimum yield and quality at harvest.     

水田机械式强制排肥装置设计与试验

目前水田机械施肥均匀性差，且作业时在施肥开沟器末端容易出现肥料粘结、架空、堵塞开沟器等现象。针对以上问题，本文设计了一种水田机械式强制排肥装置，并对其关键部件进行了结构设计及性能试验。将水田机械式强制排肥部件的工作过程分为3个阶段，通过运动学和动力学研究方法分析了各工作阶段肥料在螺旋强制排肥部件内的状态，以及影响排肥部件工作性能的关键因素，对螺旋强制排肥部件的直径、转速、螺距3个因素进行了设计计算。以排肥均匀性变异系数为响应指标，进行了螺旋强制排肥部件的单因素台架试验，通过对最小显著性差异进行统计分析，确定了各因素的取值范围；安排了二次正交旋转组合试验，并对试验结果进行了方差分析和响应面分析，确定了影响排肥性能指标因素的影响由大到小为转速、螺距、直径，建立了排肥性能指标与各因素之间的回归方程，运用Design-Expert软件对试验因素优化求解，确定了较优工作参数组合为螺旋输送器转速120.09r/min、直径23.90mm、螺距21.54mm，此时施肥装置台架试验的排肥均匀性变异系数为7.18%。将所设计的强制排肥部件分别安装在水稻插秧机及水稻气力式施肥播种机上，进行了田间验证试验，试验结果表明，机械式强制螺旋排肥装置工作稳定、堵塞率低，水田防堵塞效果优于无该部件的施肥机械。     

Compatibility of root growth and tuber production of potato cultivars with dynamic and static water‐saving irrigation managements

The important root characteristics of root length density (RLD) and root mass density (RMD) generally differ among irrigation managements and potato cultivars. The objective of this study was to investigate the RLD and RMD variations and their functional relationships with gross potato tuber yield for two commercial potato cultivars, Agria and Sante, under different irrigation strategies. Full irrigation and water‐saving irrigation strategies, deficit and partial root drying irrigations, were applied statically (S) and dynamically (D) based on daily crop evapotranspiration. Results showed that SPRD had significantly greater RLD (3.64 cm/cm³) and RMD (132.7 μg/cm³) than other irrigation treatments. Between the potato cultivars, Agria had significantly larger values of RLD (3.50 cm/cm³) and RMD (138.7 μg/cm³) than Sante. The functional relationship between the root growth characteristics and tuber yield showed that under water‐saving irrigations, Agria increased root mass at the expense of gross tuber yield but Sante increased root mass to maintain larger gross tuber yields. However, Agria produced more roots and gross tuber yield than Sante, and it is concluded that Agria is a more drought‐tolerant potato cultivar, which is recommended for tuber production in regions where water might be scarce. It was shown that larger root production in potatoes was associated with improved tolerance to water stress.     

浅谈发动机冷却系统燕平衡整机试验

发动机冷却系统热平衡整机试验作为拖拉机的基本性能,在试验中,如何发现特点、提高发动机冷却系统热平衡整机性能,已成为产品研发中的重要环节。     

拖拉机室内台架试验技术现状与展望

作为拖拉机研发的重要验证手段，拖拉机室内台架试验可方便高效地为拖拉机模拟各种工况下的性能表现。首先探究动力总成控制技术、负载模拟技术、试验数据处理技术和试验结果评价技术4种拖拉机室内台架试验关键技术，结合试验技术的最新研究进展，对4种技术进行详细的阐述和分析。接着从动力总成控制算法、负载模拟算法、试验数据处理方法、试验结果评价指标体系4个方面对拖拉机室内台架试验技术进行讨论与展望。最后得出对动力总成算法进行优化、提高动态负载模拟精度、保持试验数据处理方法的前沿性、对试验结果综合客观评价是拖拉机室内台架试验技术的发展趋势，以期为我国拖拉机室内台架试验技术的发展提供参考。     

混合盐胁迫对马蔺幼苗根系构型及生长量的影响

为探讨不同种类盐胁迫对马蔺幼苗生长状况的影响,采用室内培养的方法,研究总质量浓度为0.3%的NaCl、NaHCO₃单盐溶液及其不同配比的混合盐溶液胁迫对马蔺(Iris lactea var. chinensis)幼苗生长量、地上部干鲜重比值、地下部干鲜重比值以及根系构型的影响。结果表明,随着胁迫时间的延长,0.3%NaCl溶液对叶数和株高增长量的影响最小,其次为3种混合盐溶液,各处理在第14天时株高增幅达到最大。经0.3%NaHCO₃处理后的幼苗地上部干鲜重的比值为空白对照的2.17倍,地下部干鲜重则为空白对照的56.61%,随着混合溶液中NaHCO₃浓度的上升,地上部干鲜重比值表现出上升的趋势,地下部干鲜重比值则表现出下降的趋势。经35天处理后,0.3%NaHCO₃胁迫的马蔺幼苗根系总长、根系表面积较对照均显著下降,降幅分别为39.73%、26.08%,而各处理间的根系体积却无显著差异。研究结果显示,0.3%NaHCO₃溶液对马蔺幼苗的胁迫作用最强,2种单盐对根系的胁迫作用强于混合盐胁迫,而0.3%NaCl溶液对生长量的胁迫作用最弱。     

利用SSR技术鉴定西瓜甜瓜种子纯度

利用SSR分子标记技术对西瓜‘W1806’与甜瓜‘M1805’各3个批次及其亲本间的多态性进行引物筛选和种子的纯度鉴定。结果表明,在28对西瓜的SSR引物中,有5对引物在西瓜‘W1806’的F1代与亲本之间有很好的多态性。其中BVWS00839引物特异性好,条带清晰,父母本条带间隔明显,即作为3个批次的西瓜纯度鉴定的引物,其鉴定纯度分别为99.47%、98.96%和97.92%;在18对甜瓜的SSR引物中,只有1对CMBR052引物在F1代扩出的条带为典型的双亲互补型条带,故用该引物对甜瓜进行纯度鉴定,其纯度分别为97.90%、96.80%和97.40%。与田间鉴定结果的吻合率都在98%以上。这2个材料的吻合率说明SSR分子标记技术对西瓜和甜瓜纯度鉴定结果都是可靠的。     

不同施氮量下覆膜滴灌玉米相对根长密度模型研究

为探明施氮量对宁夏引黄灌区覆膜滴灌玉米根长密度(RLD)的影响,设置5个施氮水平和1个对照(CK,不施氮与不覆膜)进行试验,测定玉米RLD,建立不同施氮量下相对根长密度(NRLD)模型,并加以检验。结果表明:不同施氮处理的玉米RLD分布区域均随土层深度的增加而减小,且大部分集中在0～20 cm土层;随着施氮量的增加,RLD分布区域明显扩大; NRLD分布满足三阶多项式函数模型,模拟曲线的决定系数R2为0.951,模型检验结果R2为0.845,均方根误差(RMSE)为0.248,拟合效果好,但该多项式模型不能保证NRLD在相对取样深度Zr为1时达到0,故对玉米NRLD分布多项式模型进行优化。优化模型验证结果显示,各施氮处理RMSE不大于0.308,CK、N0、N1、N2、N3和N4处理的标准化均方根误差分别为0.242、0.193、0.184、0.226、0.208和0.273,R2分别为0.903、0.953、0.920、0.944、0.962和0.898,具有较高的拟合度,解决了NRLD在Zr=1时达到0的问题。本研究可为宁夏引黄灌区膜下滴灌玉米NRLD分布拟合、根系养分吸收和施肥管理提供理论参考。     

Quantitative trait loci analysis for root traits in synthetic hexaploid wheat under drought stress conditions

Synthetic hexaploid wheat(SHW), possesses numerous genes for drought that can help breeding for drought-tolerant wheat varieties. We evaluated 10 root traits at seedling stage in 111 F9 recombinant inbred lines derived from a F2 population of a SHW line(SHW-L1) and a common wheat line, under normal(NC) and polyethylene glycol-simulated drought stress conditions(DC). We mapped quantitative trait loci(QTLs) for root traits using an enriched high-density genetic map containing 120 370 single nucleotide polymorphisms(SNPs), 733 diversity arrays technology markers(DArT) and 119 simple sequence repeats(SSRs). With four replicates per treatment, we identified 19 QTLs for root traits under NC and DC, and 12 of them could be consistently detected with three or four replicates. Two novel QTLs for root fresh weight and root diameter under NC explained 9 and 15.7% of the phenotypic variation respectively, and six novel QTLs for root fresh weight, the ratio of root water loss, total root surface area, number of root tips, and number of root forks under DC explained 8.5–14% of the phenotypic variation. Here seven of eight novel QTLs could be consistently detected with more than three replicates. Results provide essential information for fine-mapping QTLs related to drought tolerance that will facilitate breeding drought-tolerant wheat cultivars.